Gas to liquids GTL is the conversion of natural gas to liquid fuels and other products, including gasoil, naphtha, kerosene, normal-paraffin and lubricants. Pearl GTL has a capacity ofbarrels per day of these products andbarrels per day of liquefied petroleum gas, and the data produced by its quality control program is tremendous:
May 27th, By Joshua Lim Category: Featured Articles This a guest post by Joshua Lim. He spent a few years in college as a Baptist before moving back to a confessional Reformed denomination URCNA prior to entering seminary.
He was received into full communion with the Catholic Church this year on April 21st, the feast day of St. He plans on continuing his studies in systematic theology. Joshua Lim It is hard to pinpoint any single factor that led to my conversion.
Before coming to an actual decision point, I had never considered Catholicism to be an option for anyone in search of truth; even when I was most open to it, I would have sooner turned to agnosticism than to Rome.
And yet, here I am, a Roman Catholic — and a happy one, at that.
P2 Energy Solutions empowers the people who power the world. Upstream oil and gas professionals from more than 1, companies around the globe rely on P2’s oil and gas accounting, data, land, production, and reserves technology and solutions to optimize . January 4, – Koch-Glitsch and EFT Analytics announced a partnership to provide full service process engineering and advanced data analytics solutions to enhance operations for refineries and petrochemical plants. This a guest post by Joshua Lim. Joshua graduated this Spring from Westminster Seminary California, where he earned his MA in historical theology. He was born and raised in the PCUSA. He spent a few years in college as a Baptist before moving back to a confessional Reformed denomination (URCNA.
In order to understand why I converted to Catholicism, it is perhaps best to begin with my move from broad evangelicalism to a more traditional expression of Protestantism.
I was born and raised in the Presbyterian church. During high school, thanks to one devoted pastor, I began to study the Bible seriously and ended up leaving the Presbyterianism of my youth and becoming a Baptist. The Baptist church I subsequently joined was generally Calvinist and was composed of college students and young adults who were very fervent in their devotion to the Lord.
The pastor and elders highly emphasized sola scriptura, community, holy living, revival, and missions.
While theology was prized, there was, in my opinion, an anti-intellectual ethos, and the study of too much theology, which was often held in contrast to the Bible, was sometimes frowned upon.
Despite the relatively small size of the church, or perhaps because of it, there was a sense that, in many ways, we were the only truly biblical church.
Over time, I began to grow uncomfortable with the arbitrariness of such a small and isolated church structure the pastor seemed to have as much authority as the pope ; this, combined with my own Luther-like angst caused by the almost solely sanctification-driven sermons as well as a youthful zeal on my part ultimately pushed me toward the more traditional Reformed expression of Protestantism.
Eventually, through the writings of Geerhardus Vos and Meredith Kline, I ended up rejecting Dispensationalism; further study led me to the writings of Michael Horton, who emphasized the centrality of the preached Word as well as the regular administration of the Sacraments which were, in good Protestant form, two: I came to greatly appreciate the sacraments as well as the liturgical form of worship in contrast to the often inconsistent and subjectivistic tendencies of the majority of evangelicalism.
Moreover, my law-induced angst was alleviated by the gospel of free justification sola gratia et sola fide. Yet, it was not very long until my Nietzschean drive for truth was left desiring something more. Though Barth vehemently denounced Catholicism, I still found a certain Catholic tendency, an ecumenical spirit, if you will, throughout his work.
It was his writing that gradually opened me up to actually listen to opposing views; not in such a way that made me invulnerable to criticism—reading opposing views through my own lenses—but rather attempting to understand each view according to its own perspective and presuppositions.
I also began to read the Bible in this way; rather than interpret the text in such a way so as to accommodate a certain notion of justification sola fide, I tried to understand how other traditions understood Scripture; and I often found these competing interpretations to be, in their own right, very compelling.
This, no doubt, left me highly dissatisfied with the Reformed confessionalism that I had come to love.
While I initially believed these narratives to be true, it became harder for me to see such distinctions as anything but an arbitrary defense mechanism. Yet, it was unclear how such a recovery could not immediately devolve into the in-fighting typical of Reformed denominations indeed, it seems impossible to even get to the point where such a devolution could occur.
At least on this point, it seems that Charles Finney had a degree of truth on his side: If the confessions do not have, at least in practice, the same authority as the Magisterium, it does not seem that they have any authority at all.
The moment someone disagrees with the confession or a given interpretation of the confession on biblical grounds, they no longer need to submit themselves to that governing body. And that this has actually happened throughout history is not difficult to substantiate.
These irresolvable doubts led me to the slough of despond.Natural gas can be used in the form of compressed natural gas (CNG) or liquified petroleum gas (LPG).
There are many ways to measure natural gas, but the commonly used is the Gigajoule (GJ), which is equivalent to a billion joules. The field of oil and gas production is filled with partial differential equations, nonlinear systems of equations, Monte Carlo simulations, uncertainty analysis and statistics.
Imagine you are an engineer working for an oil company on a large field. The oil industry, with its complex and demanding produc-tion techniques, and the environmental Preventing corrosion is vital in every step in the production of oil and gas.
Corrosion in the Oil Industry Denis Brondel Montrouge, France Randy Edwards Columbus, Ohio, USA Andrew Hayman most economical solution.
Corrosion engi-. Overview SolidWorks® CAD software provides a complete 3D product development solution for meeting the demands of today’s rapidly evolving oil and gas industry. With SolidWorks software, engineers can more efficiently use 3D design data at every stage of the development process, realizing productivity gains and reduced costs across the board.
ranks of oil producers in when the company discovered oil in commercial quantity producing about 5, barrels per day (bpd). Today, the oil industry is highly visible in the Niger Delta and has control over a large expanse of land. Gmail is email that's intuitive, efficient, and useful.
15 GB of storage, less spam, and mobile access.